OHTL Design Quiz OHTL DESIGN TECHNICAL QUIZ Full Name Designation 1. What is the primary purpose of sag in transmission lines? Increase resistance Maintain conductor clearance Reduce insulation Increase voltage 2. Sag in a conductor increases with: Lower temperature Lower span length Higher temperature Lower wind pressure 3. PLS-CADD is mainly used for: Substation protection […]
OHTL DESIGN TECHNICAL QUIZ Read More »
Abstract Lifting operations in Overhead Transmission Line (OHTL) tower erection are among the most critical and high-risk construction activities. These operations involve heavy steel components, complex geometries, environmental forces, and often work near energized lines. This article presents a structured engineering methodology for preparing safe and efficient lifting plans. It covers structural segmentation, load calculations,
Engineering Methodology for Safe and Efficient Lifting Plans in OHTL Tower Erection Read More »
Anti-Theft Bolts in Overhead Transmission Towers Structural Function, Mechanical Behavior, and Application in Transmission Systems Overhead transmission towers are critical infrastructure used to support high-voltage power lines across long distances. These towers are assembled using hundreds or even thousands of structural bolts that connect steel members and ensure the tower can withstand mechanical loads. However,
Ramadan Special Quiz – OHTL Design 🌙 Welcome to Ramadan Special Quiz Conducted by OHTL Design Topic: PLS-CADD & Transmission Line Design 1. PLS-CADD software is primarily used for: Overhead transmission line design Electrical circuit simulation Substation protection design 2. PLS-CADD was developed by: Power Line Systems Siemens ABB 3. Tower used when line changes
Ramadan Special PLS-CADD Quiz – OHTL Design Read More »
Introduction Transmission line towers are critical components of electrical power transmission systems. Their primary function is to support overhead conductors while maintaining required electrical clearances, mechanical strength, and system reliability. The selection of an appropriate transmission tower type depends largely on terrain conditions, line deviation angle, voltage level, span length, and mechanical loading. Utilities such
Abstract Extra High Voltage (EHV) 380 kV Overhead Transmission Lines (OHTL) form the backbone of modern power transmission systems, especially in the Kingdom of Saudi Arabia, where long transmission corridors and high power demand dominate network planning. One of the most critical operational challenges in long EHV OHTL is phase electrical unbalance, caused by the
F_TR3 Phase Transposition Tower for 380 kV Overhead Transmission Lines (OHTL) Read More »
A high-voltage transmission line project involves a coordinated sequence of activities that transform engineering designs into a fully operational power transmission system. The scope of works defines all tasks required to execute the project safely, efficiently, and in compliance with applicable technical standards. These works generally include civil construction, transmission line erection, communication system installation,
Scope of Works in a High-Voltage Transmission Line Project- A to Z Info Read More »
🔹 Project & Contractual Milestones 🔹 Design & Engineering 🔹 Electrical & Transmission Line 🔹 Structural & Civil Engineering 🔹 Software & Tools 🔹 Documentation & Management 🔹 Miscellaneous / Common Technical Terms
Abbreviations & Full Forms (Transmission Line Project Context) Read More »
Introduction Deep foundations, particularly pile foundations, play a critical role in the structural integrity and long-term performance of Overhead Transmission Line (OHTL) towers. In projects executed under the Saudi Electricity Company (SEC), deep foundations are widely adopted due to challenging geotechnical conditions such as weak surface soils, high groundwater levels, and severe uplift forces acting
Deep Foundations for OHTL Towers as per Saudi Electricity Company (SEC) Standards Read More »
1. Introduction In modern high-voltage transmission and substation projects, communication systems are a critical part of power system operation. They support: To achieve reliable communication over long distances and within substations, optical fiber communication is widely used. The most common arrangement includes: 2. Overall Communication System Concept The communication network in a power transmission project
Communication Works in High Voltage Substation Projects Read More »
